Tips for purchase
Requirements for equipment installation
There are two protocol versions: WiFi Version and Zigbee Version.
WiFi Version needs to link to WiFi when working.
Zigbee Version requires Tuya Zigbee Hub to work together, Other Zigbee Hubs and Zigbee2MQTT are not supported.
About Update Frequency
1. The sensor uses a trigger mechanism. When the temperature or humidity changes to the set value, the sensor will report the data immediately. Generally, the data is updated once an hour.
2. The sensor cannot set the update report data frequency.
3. The sensor cannot set alarm. The alarm function is set on the APP.
If you need to update data in real time, please purchase a USB powered version(TH06/TH16).
About Proper Selection and Use of Batteries
1. Only LR03-1.5V alkaline battery can be used (1.2V rechargeable battery may cause the equipment to detect wrong voltage and report low voltage)
2. Batteries of different models or brands cannot be mixed.
4. New and old batteries cannot be mixed.
5. It is prohibited to use inferior batteries.
Otherwise: 1. Configuration fails; 2. Battery consumption is too fast.
How to obtain high-quality battery? Please buy in a regular supermarket or chain supermarket.
Note: After the device configuration is completed, it needs to be placed in a position where the wireless signal is good, otherwise the device signal power will become larger, which will lead to excessive battery consumption.
About Network Testing
Devices using the network consume a lot of power. To ensure the service life of the battery, the device will stop using the network when it does not need to report data
Therefore, it is meaningless to test the network signal of sensors in APP.
Error on temperature and humidity
1. All temperature and humidity sensors will have certain errors, please note. The temperature error of this sensor is ± 1 ℃, and the humidity error is ± 5% RH. Any value within this range is normal.
2. The sensor error and manufacturing process will meet, and there will also be some errors between products of the same model.
3. According to Newton’s third law, heat conduction takes a certain time. The sensor needs 30 minutes or 1 hour to be consistent with the room temperature, and the measurement will be accurate.
Historical curve of temperature and humidity
1. The minimum granularity of historical data (daily chart) is 1 hour, and the minimum granularity of exported data is also 1 hour.
2. Days of historical data are stored for 7 days.
3. The value of historical data is the average value. That is, the average value of a minimum granularity time.
Support for third-party smart speakers
1. Because the third-party smart speakers (Google Home/Amazon Alexa) do not have control panels corresponding to temperature and humidity sensors,
Therefore, the APP of third-party smart speakers may not display the temperature and humidity correctly.
But we have developed voice query function. Therefore, the current temperature and humidity can be queried by voice
2. Route or automatic process related to temperature and humidity cannot be established on the third-party smart speakers.
3. The device does not support Yandex Alice.
Trigger mechanism of temperature and humidity in automatic process
We used Edge Triggered (ET)
That is, the action can only be triggered if the condition crosses the set condition.
A: For example, turn on the light when the automatic setting temperature is greater than 25 ℃.
A.1. When the temperature rises from below 25 ℃ to 25 ℃, the automatic process can trigger the ON light.
A.2. After the automatic process is set, the temperature is always above 25 ℃, and the lamp is not turned on.
B: For example, when the automatic setting temperature is less than 20 ℃, turn on the light.
B.1. When the temperature drops from above 20 ℃ to 20 ℃, the automatic process can trigger the start lamp.
B.2. After the automatic process is set, the temperature is always below 20 ℃, and the lamp is not turned on.
When will the battery consume quickly
1. The correct type of battery is not selected, or the battery is mixed.
2. The sensor shall be installed at the location where the ambient temperature or humidity changes dramatically. In this environment, the device will frequently start the network to report data.
3. The sensor is installed in a low temperature environment for a long time (such as less than 0 ℃), and the battery performance will decline rapidly at this temperature.
4. The sensor is installed at a location where the network signal is very poor. When the network signal is poor, the equipment will increase the transmission power of the signal, resulting in increased power consumption.
5. The equipment is in a high humidity environment for a long time, which will corrode the battery and cause battery leakage.
APP Show
spedito in fretta. arrivato nei tempi previsti. Oggetto come da descrizione. venditore affidabile consigliato
Works flawlessly with SmartLife application and easily integrated with HomeAssistant.
Working with no issues. We've setup 2 inside a Guinea Pig hutch (which is in a shed) for the colder weather in the UK so we can monitor the temperature and humidity.
Works well. I have it set up to monitor the temperature in a heated greenhouse. when the temperature drops below a user preset temperature, it can trigger a Tuya plug to turn on, and activate the heater.
Item received in good condition and requires a AAA battery for power. The reflected temperature is accurate and effectively triggers the air conditioner when the room reaches a certain temperature, which is great. I hope the battery life lasts longer, as there is no display. My previous non-Zigbee version only lasted about two weeks on rechargeable AAA batteries, which wasn’t ideal. Overall, the product works well. Thanks to the seller.
già comprati antecedentemente. funzionano benissimo.
Работает. как и ожидалось
I have one in my chicken coop and it just works!
Livraison conforme, bonne qualité. Retrace les températures et l'humidité avec un historique (jours/mois/année). Se connecte facilement au wifi (et reconnexion automatique en cas de coupure wifi) , utilisation simple. La fiabilité des capteurs semble cohérente (comparatif avec d'autres appareils)
працює як треба, все показує і вимірює, став на крок ближче до розумного будинку.
Lavora correttamente! Di facile installazione! Ottimo prodotto
El termostato Zigbee de Tuya ha revolucionado el control climático de mi hogar. Su instalación fue sencilla y la configuración, intuitiva. La pantalla táctil ofrece una interfaz clara y fácil de usar. La precisión en el control de temperatura es impresionante, manteniendo un ambiente confortable en todo momento. La conectividad Zigbee garantiza una comunicación estable y de bajo consumo. La integración con Home Assistant ha sido perfecta, permitiéndome automatizar el clima de forma avanzada. Puedo programar horarios, crear escenas y controlarlo remotamente sin problemas. El ahorro energético es notable gracias a sus funciones inteligentes. La relación calidad-precio es excelente. En resumen, este termostato Tuya es una excelente elección para quienes buscan eficiencia y comodidad en la gestión del clima doméstico.
Excellent 👌 Works very well on WiFi. Shows temperature and humidity. The historical trend chart is very useful.
Wszystko dobrze szybka dostawa produktu zgodny z opisem fajnie gockiej widoku napewno się przyda słownik dupa
Ces petits capteurs sont très efficaces et simples de mise en service
Good looking temperature sensor, quite small, powered by 2 AAA batteries, connecting easy to smart life app
Rapid to Connect to Wi-Fi and Smarthome app.
werkte goed. goede montage makkelijke app
These are identical to the ones on Amazon, but a fraction of the price. Nice and simple, easy to set up.
Schnelle Lieferung. Ich bin zufrieden. Kann ich gut weiterempfelen!
Tout à fait conforme à mes attentes. Facile à connecter
llego rapido y en perfectas condiciones. es facil de configurar y tambien funciona perfecto
Received on time and in good order, the unit is under test now, temperature accuracy seems ok, power consumption (2AAA batteries) to be monitored.
Matériel conforme à la description
sensore di facile configurazione e funzionante perfettamente, abbinamento rapido